Skip to main content

Perl Can't Locate in @inc

Recently I try to install  SmokePing (tar ball) on Centos 7, for my company to check Network latency, but  same error re-occur.

Multiple Errors:

Then I search a lot, try to install the packages but the problem still appear, then after I found  a simple solution.



Solution:

# perl -MCPAN -eshell
Terminal does not support AddHistory.

cpan shell -- CPAN exploration and modules installation (v1.9800)
Enter 'h' for help.

cpan[1]> install Net::OpenSSH
Reading '/root/.cpan/Metadata'
  Database was generated on Sat, 03 Sep 2016 21:53:30 GMT
Running install for module 'Net::OpenSSH'
Running make for S/SA/SALVA/Net-OpenSSH-0.73.tar.gz
Fetching with LWP:
http://cpan.communilink.net/authors/id/S/SA/SALVA/Net-OpenSSH-0.73.tar.gz
Fetching with LWP:
http://cpan.communilink.net/authors/id/S/SA/SALVA/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/S/SA/SALVA/Net-OpenSSH-0.73.tar.gz ok
Scanning cache /root/.cpan/build for sizes
............................................................................DONE

  CPAN.pm: Building S/SA/SALVA/Net-OpenSSH-0.73.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Net::OpenSSH
Could not read metadata file. Falling back to other methods to determine prerequisites
cp lib/Net/OpenSSH/ConnectionCache.pm blib/lib/Net/OpenSSH/ConnectionCache.pm
cp lib/Net/OpenSSH/ShellQuoter/fish.pm blib/lib/Net/OpenSSH/ShellQuoter/fish.pm
cp lib/Net/OpenSSH/ShellQuoter.pm blib/lib/Net/OpenSSH/ShellQuoter.pm
cp lib/Net/OpenSSH/ShellQuoter/POSIX.pm blib/lib/Net/OpenSSH/ShellQuoter/POSIX.pm
cp lib/Net/OpenSSH/ModuleLoader.pm blib/lib/Net/OpenSSH/ModuleLoader.pm
cp lib/Net/OpenSSH/ShellQuoter/Chain.pm blib/lib/Net/OpenSSH/ShellQuoter/Chain.pm
cp lib/Net/OpenSSH/SSH.pm blib/lib/Net/OpenSSH/SSH.pm
cp lib/Net/OpenSSH/Constants.pm blib/lib/Net/OpenSSH/Constants.pm
cp lib/Net/OpenSSH/ShellQuoter/MSWin.pm blib/lib/Net/OpenSSH/ShellQuoter/MSWin.pm
cp lib/Net/OpenSSH/OSTracer.pm blib/lib/Net/OpenSSH/OSTracer.pm
cp lib/Net/OpenSSH.pm blib/lib/Net/OpenSSH.pm
cp lib/Net/OpenSSH/ShellQuoter/MSCmd.pm blib/lib/Net/OpenSSH/ShellQuoter/MSCmd.pm
cp lib/Net/OpenSSH/ShellQuoter/csh.pm blib/lib/Net/OpenSSH/ShellQuoter/csh.pm
cp lib/Net/OpenSSH/ObjectRemote.pm blib/lib/Net/OpenSSH/ObjectRemote.pm
Manifying blib/man3/Net::OpenSSH::SSH.3pm
Manifying blib/man3/Net::OpenSSH::Constants.3pm
Manifying blib/man3/Net::OpenSSH::ShellQuoter::MSWin.3pm
Manifying blib/man3/Net::OpenSSH::ConnectionCache.3pm
Manifying blib/man3/Net::OpenSSH::ShellQuoter::MSCmd.3pm
Manifying blib/man3/Net::OpenSSH.3pm
Manifying blib/man3/Net::OpenSSH::OSTracer.3pm
  SALVA/Net-OpenSSH-0.73.tar.gz
  /usr/bin/make -- OK
'YAML' not installed, will not store persistent state
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1_run.t .... #
# SSH client found: OpenSSH_6.6.1p1, OpenSSL 1.0.1e-fips 11 Feb 2013.
# Trying to connect to localhost, timeout is 15s.
Warning: Permanently added 'localhost' (ECDSA) to the list of known hosts.
root@localhost's password:
t/1_run.t .... ok  
t/quoting.t .. # unable to exec csh -c echo good
# unable to exec tcsh -c echo good
# unable to exec ksh -c echo good
# unable to exec dash -c echo good
# unable to exec ash -c echo good
# unable to exec pdksh -c echo good
# unable to exec mksh -c echo good
# unable to exec zsh -c echo good
# unable to exec fish -c echo good
# running tests for shells sh bash
t/quoting.t .. ok    
t/uri.t ...... ok  
All tests successful.
Files=3, Tests=471, 16 wallclock secs ( 0.17 usr  0.01 sys +  1.63 cusr  1.06 csys =  2.87 CPU)
Result: PASS
  SALVA/Net-OpenSSH-0.73.tar.gz
  /usr/bin/make test -- OK
Running make install
Installing /usr/local/share/perl5/Net/OpenSSH.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ConnectionCache.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ModuleLoader.pm
Installing /usr/local/share/perl5/Net/OpenSSH/SSH.pm
Installing /usr/local/share/perl5/Net/OpenSSH/Constants.pm
Installing /usr/local/share/perl5/Net/OpenSSH/OSTracer.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ObjectRemote.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter/fish.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter/POSIX.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter/Chain.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter/MSWin.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter/MSCmd.pm
Installing /usr/local/share/perl5/Net/OpenSSH/ShellQuoter/csh.pm
Installing /usr/local/share/man/man3/Net::OpenSSH::SSH.3pm
Installing /usr/local/share/man/man3/Net::OpenSSH::Constants.3pm
Installing /usr/local/share/man/man3/Net::OpenSSH::ShellQuoter::MSWin.3pm
Installing /usr/local/share/man/man3/Net::OpenSSH::ConnectionCache.3pm
Installing /usr/local/share/man/man3/Net::OpenSSH::ShellQuoter::MSCmd.3pm
Installing /usr/local/share/man/man3/Net::OpenSSH.3pm
Installing /usr/local/share/man/man3/Net::OpenSSH::OSTracer.3pm
Appending installation info to /usr/lib64/perl5/perllocal.pod
  SALVA/Net-OpenSSH-0.73.tar.gz
  /usr/bin/make install  -- OK

Comments

Popular posts from this blog

Mikrotik Hotspot Redirect After Login

This tutorial assumed you already create Hotspot in your router. If you don't know how to create a hotspot in Mikrotik router, click here and create the Hotspot. . After successfully creating the hotspot server go to "Files" Menu of  the main Window of Mikrotik router Copy "hotspot" folder into your PC. Open "alogin" file with text editor Replace "link-redirect" text with your desire URL Now you're done! After successfully logging into the Hotspot server your client automatically redirects to your external link.  Don't forget to copy this folder into Mikrotik Router "Files" Menu. You can also drag and drop this folder into "Files" menu. 

Cisco ASA in GNS3

Here is another tutorial running Cisco ASAv on GNS3 using Qemu. For Configure GNS3 In My case I have used ASAv952-204.qcow2 Go  to the GNS3>Edit>Preferences>QEMU>Qemu VMs>New Follow on screen procedure.  Don't forget to enable kvm and memory allocation.  Now you can see I can run ASAv 9.5.2 Blank Password.

IOS XR GNS3 QEMU

This time lets have tutorial on Cisco XR 9k series router image running on the GNS3. Please don't ask for the XR image. Your are smart enough to get it. My system configuration: Ubuntu 16.04 GNS3 1.4 RAM 8Gig i7 processor Used XR Image iosxrv-k9-demo-6.0.1.qcow2 This image is VIRL extracted image. You need to convert this image into QEMU image, follow this link I strongly recommend you to run it on the Linux system. Now you have converted image, then go to the GNS3>Edit>Preferences>QEMU>Qemu VMs>New then follow the onscreen procedure. Setting for QEMU XR Image. RAM:- 4Gig CPU:- 1 Adapters at lest 4.  -enable-kvm Here you can see I can run the XR on my system. Interface is up and system is already booted.  I have run 3 XR router  here is my system RAM CPU usages. RP/0/0/CPU0:XR3(config)#int gi0/0/0/0 RP/0/0/CPU0:XR3(config-if)#ip add 192.168.13.2 255.255.255.252 RP/0/0/CPU0:XR3(config-if)#co