Skip to main content

JunOS VirtualBox GNS3

 This is the Step 2 in our GNS3 Lab with JunOS, Quagga and Cisco router.

I have tried different tutorial posted in other blogs. I've never found any tutorial  work until now. Every-time I stuck at the middle of the tutorials.  In this blog post, I'll show you how to install JunOS in VBox and later I'll integrate it into GNS3 lab.

I have take Olive12.1R1.9.img, I know you're smart to get it from the Internet. Lets begin the installation of JunOS. Before that, convert the JunOS image into Vbox vdi Image.

For easy installation and to avoid error during this tutorial, enter into the JunOS folder, in my case.

This tutorials assume that you have already install GNS3 and VBox.


Step 1

Prepare JunOS for VBox.
C:\Users\jpudasaini\Desktop\jun>"C:\Program Files\Oracle\VirtualBox\VBoxmanage" convertdd Olive12.1R1.9.img Olive12.1.R1.9.vdi
Its take time to convert the image, wait for few minute depends on your PC configuration.

Now go to the jun folder you can see Olive12.1R1.9.vdi image is created.

Step 2
  • Open VBox and create New Virtual Machine and give any name choose BSD then FreeBSD.
  • On next window choose at least 512MB RAM, click next.
  • Now its important step, while choosing Hard Drive in this step select "Use an existing virtual hard drive file". Then locate previous created vdi file. In my case "c:\user\jpudasaini\Desktop\jun\Olive12.1R1.9.vdi"
  • Its time to open GNS3>Edit>Preferences>VirtualBox>VirtualBox Guest
  1. Identifier name: Juniper
  2. VM List:- JunOS(In this step you may not seen any VBox OS just click "Refresh VM List"
  3. Click "save" and go the GNS3 main window, 

Add VirtualBox Guest in GNS3 working area. Becareful in this step, don't run guest OS from VBox, just run it from GNS3 Working enviroment area, right clicking and start.
  • To login to router console just right click JunOS and choose"console" now you can login to router console with ID "root" no password.


Your JunOS router is ready to used.


Enjoy! :)

Comments

Popular posts from this blog

Mikrotik Hotspot Redirect After Login

This tutorial assumed you already create Hotspot in your router. If you don't know how to create a hotspot in Mikrotik router, click here and create the Hotspot. . After successfully creating the hotspot server go to "Files" Menu of  the main Window of Mikrotik router Copy "hotspot" folder into your PC. Open "alogin" file with text editor Replace "link-redirect" text with your desire URL Now you're done! After successfully logging into the Hotspot server your client automatically redirects to your external link.  Don't forget to copy this folder into Mikrotik Router "Files" Menu. You can also drag and drop this folder into "Files" menu. 

Cisco ASA in GNS3

Here is another tutorial running Cisco ASAv on GNS3 using Qemu. For Configure GNS3 In My case I have used ASAv952-204.qcow2 Go  to the GNS3>Edit>Preferences>QEMU>Qemu VMs>New Follow on screen procedure.  Don't forget to enable kvm and memory allocation.  Now you can see I can run ASAv 9.5.2 Blank Password.

IOS XR GNS3 QEMU

This time lets have tutorial on Cisco XR 9k series router image running on the GNS3. Please don't ask for the XR image. Your are smart enough to get it. My system configuration: Ubuntu 16.04 GNS3 1.4 RAM 8Gig i7 processor Used XR Image iosxrv-k9-demo-6.0.1.qcow2 This image is VIRL extracted image. You need to convert this image into QEMU image, follow this link I strongly recommend you to run it on the Linux system. Now you have converted image, then go to the GNS3>Edit>Preferences>QEMU>Qemu VMs>New then follow the onscreen procedure. Setting for QEMU XR Image. RAM:- 4Gig CPU:- 1 Adapters at lest 4.  -enable-kvm Here you can see I can run the XR on my system. Interface is up and system is already booted.  I have run 3 XR router  here is my system RAM CPU usages. RP/0/0/CPU0:XR3(config)#int gi0/0/0/0 RP/0/0/CPU0:XR3(config-if)#ip add 192.168.13.2 255.255.255.252 RP/0/0/CPU0:XR3(config-if)#co