Kali linux Device not manage

Recently I upgrade Kali linux 1.0.4 to 1.0.5, all goes well but when I try to up eth0 it didn't up and show message "Device Not Manage".

I did everything to get it up but no command avail to up it.
like:
root@kali:~#service networking restart
root@kali:~#service networking start
root@kali:~#ifconfig eth0 down
root@kali:~#ifconfig eth0 up

Then after googling I found one solution

root@kali:~# vi /etc/NetworkManager/NetworkManager.conf

Network manager will opened and you can see following line on that file.

[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false

Now edit and change false to true

[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true

Now use this command to restart Network manager

root@kali:~# service network-manager restart

Then you can see your LAN is working.

Comments

Mikrotik Hotspot Redirect After Login

This tutorial assumed you already create Hotspot in your router. If you don't know how to create a hotspot in Mikrotik router, click here and create the Hotspot. . After successfully creating the hotspot server go to "Files" Menu of the main Window of Mikrotik router Copy "hotspot" folder into your PC. Open "alogin" file with text editor Replace "link-redirect" text with your desire URL Now you're done! After successfully logging into the Hotspot server your client automatically redirects to your external link. Don't forget to copy this folder into Mikrotik Router "Files" Menu. You can also drag and drop this folder into "Files" menu.

Cisco ASA in GNS3

Here is another tutorial running Cisco ASAv on GNS3 using Qemu. For Configure GNS3 In My case I have used ASAv952-204.qcow2 Go to the GNS3>Edit>Preferences>QEMU>Qemu VMs>New Follow on screen procedure. Don't forget to enable kvm and memory allocation. Now you can see I can run ASAv 9.5.2 Blank Password.

IOS XR GNS3 QEMU

This time lets have tutorial on Cisco XR 9k series router image running on the GNS3. Please don't ask for the XR image. Your are smart enough to get it. My system configuration: Ubuntu 16.04 GNS3 1.4 RAM 8Gig i7 processor Used XR Image iosxrv-k9-demo-6.0.1.qcow2 This image is VIRL extracted image. You need to convert this image into QEMU image, follow this link I strongly recommend you to run it on the Linux system. Now you have converted image, then go to the GNS3>Edit>Preferences>QEMU>Qemu VMs>New then follow the onscreen procedure. Setting for QEMU XR Image. RAM:- 4Gig CPU:- 1 Adapters at lest 4. -enable-kvm Here you can see I can run the XR on my system. Interface is up and system is already booted. I have run 3 XR router here is my system RAM CPU usages. RP/0/0/CPU0:XR3(config)#int gi0/0/0/0 RP/0/0/CPU0:XR3(config-if)#ip add 192.168.13.2 255.255.255.252 RP/0/0/CPU0:XR3(config-if)#co

jpudasaini

Search This Blog